Ground Fault Relay (Canadian Applications Only) - Honeywell NOTIFIER PSE-6 Instruction Manual

Trouble Supervision

5.4 Ground Fault Relay (Canadian Applications Only)

The PSE-6/10C power supply has a form-C trouble relay located at TB3. The contacts can be monitored by an FACP input circuit or an
addressable monitor module similar to the drawing illustrated in Figure 5.1. Ground fault conditions will cause the relay to change states
regardless of whether the panel is in alarm or standby.
32
Ground Fault Relay (Canadian Applications Only)
PSE Series Instruction Manual — P/N LS10227-000NF-E:B 3/29/2021