Table of Contents
Related Manuals for Raycus RFL-A1000D
Summary of Contents for Raycus RFL-A1000D
- Page 1 版本号 密级 内部 阶段 标记 RFL-A1000D～2000D 光纤输出半导体激光器英文说明书 会签 RFL-A1000D～2000D·JS02 王志源 黄文娟 部 门 半导体激光器技术研究部 编 写 曾诚 20201222 校 对 李辉 20201225 受 控 审 核 刘超 20201228 武汉锐科 标 审 李其军 20201231 批 准 胡慧璇 20201231 旧底图登记号 底图登记号 无锡锐科光纤激光技术有限责任公司...
- Page 2 受 控 武汉锐科 Fiber Delivered Direct Diode Lasers User Guide RFL-A1000D～2000D...
-
Page 3: Table Of Contents
受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 TABLE OF CONTENTS 1 Safety Information........................3 1.1 Symbols Used in This User Guide..................3 1.2 Laser Classification......................3 1.3 Safety Labels........................4 1.4 Optical Safety........................5 1.5 Electrical Safety.........................5... - Page 4 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 4.5 Operating Process......................27 4.6 Selection of Control Mode....................27 4.7 Pilot Light to Control.......................35 4.8 Steps of Shutting Down....................36 5 Alarms and Solutions....................... 36 5.1 Alarms Display........................
-
Page 5: Safety Information
武汉锐科 1 Safety Information Thank you for choosing Wuxi Raycus Fiber Delivered Direct Diode laser. This User Guide provides important safety, operation, warranty and other information. Please read it carefully before you use this product. In order to ensure safe operation and optimal performance of the product, please follow the warnings, cautions, operating procedures and other instructions accordingly. -
Page 6: Safety Labels
受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 1.3 Safety Labels Figure1 Top View and Back View Figure 1 shows the product safety labels and its location. These safety signs include: safety warnings, laser output head warnings, product nameplates, etc. -
Page 7: Optical Safety
受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 f) Class 2M Laser Product Label for d) Class 4 Laser Product(EN) e) Class 4 Laser Product(CN) Guide Laser(EN) g) Class 2M Laser Product Label... -
Page 8: Other Safety Rules
There are no operator serviceable parts inside, and all maintenance must be performed in Raycus or by qualified Raycus personnel. Do not try to remove covers, or electrical shock may be caused, and warranty will be void. -
Page 9: Package Contents
Please refer to the packing list accompanying the shipment to check actual items included. 2.4 Unpacking and Inspection Raycus ensure that the laser do get adequate protection by special designed packaging material and box during the transit. Even so, In order to prevent the unpredictable component damage, users need to scrutinize the packing box is right before unpacking it whether or not cracking, abrasion, dampened and other phenomena. -
Page 10: Operation Environment
受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 On unwrapping the box, Please check that packing lists and physical goods are the same. If you have any questions, feel free to contact any of us at any time. -
Page 11: Specifications
受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 Table 4 The Constant Dew Point Table AMBIENT DEW POINT Maximum Relative Humidity Ambient Temperature(℃) 20% 30% 40% 50% 60% 70% -3.5 14.5 10.5 16.5... -
Page 12: Properties Of Products
受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 e） Please inspect the output head carefully for dust or other contaminations. Use appropriate lens paper to clean it if necessary. f） The high temperature laser in summer is easy to produce dew and cause permanent damage. -
Page 13: Installation
受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 Half Angle of beam divergence（rad） ≤0.22 Delivery Cable Length(m) 5（Length customizable） 10（Length customizable） Electrical Parameters single phase 220VAC±10% three phase 380VAC±10% Power Supply 50/60Hz... - Page 14 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 Figure 3-1 Top View of 1000w Laser (unit: mm) Figure 3-2 Top View of 1500w Laser and 2000w Laser (unit: mm)
-
Page 15: Output Head And Installation
受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 3.2 Output Head and Installation Figure 4 shows iHQB Output Head： Figure 4 Dimensions of iHQB Output Head (unit: mm) Inspect the output lens before installing the output head to the processing head. -
Page 16: Installation Procedure
受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 1） summer（Ambient temperature is higher than 30℃）25±0.5℃； 2） winter（Ambient humidity temperature is lower than 30℃）22±0.5℃。 b） Coolant requirements： 1） The cooling water is pure water. It is recommended to use pure drinking water；... -
Page 17: Using The Product
Insert the water pipes into the inlet and outlet; e） Check the output head and clean it if necessary. This procedure must be performed by Raycus personnel or person authorized by Raycus. Make sure the environment is clean, or the output cable may be contaminated. -
Page 18: Front And Rear Panel
User Guide of Raycus 1000W～2000W laser 武汉锐科 Raycus CW fiber laser has stopped using the HyperTerminal, so the HyperTerminal will not work when the laser is powered on. Please clip the address below to download the latest PC software and the relevant manual. -
Page 19: Power Connection
受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 CTRL-INTERFACE: Control interface, this interface is a male DB25 connector and it’s ① multi-functional. The end users can set the control mode and input analog control signal with the interface, as well as get the fault signal from it. -
Page 20: Interface Definitions
受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 Table 7 Power Connection Instructions 1000W/1500W 2000W Definition L1、L2、L3 Phase Line Neutral Protective Earth 4.3 Interface Definitions 4.3.1 SERIVCE Security Interface Figure 7 SERIVCE Security Interface Each pin is defined as shown in Table 8 below. - Page 21 The 24V modulation signal should be applied to the connector as in Figure 8. Figure 8 Modulation Input Raycus provide MOD Cable, as shown in figure 9. Figure 9 MOD Cable - The Cable for Modulation Signal The modulation signal cable core is positive (24V) and the external metal mesh is negative (GND).
- Page 22 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 Table 9 MOD definition Name OUT/IN Function voltage current Input External modulation signal 10mA or above The internal circuit of the modulation signal is shown in figure 10.
- Page 23 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 Table 10 Control Interface Definitions Name Functions Voltage Current Enable ＞8mA LASER_EN Input Enable signal Disable Enable ＞8mA AD_EN Output External AD model enable Disable ＜100mA...
- Page 24 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 Please check the control voltage level and ensure that the level is in accordance with the requirements. Over voltage and voltage ripple may damage the product.
- Page 25 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 Figure 14 Pin Number of RS-232 Serial Port And the definitions of the pins are in the following table: Table 11 RS-232 Serial Port Definitions...
- Page 26 The default password is "1122334455667788". After the verification is passed, read or set the new laser IP address. c） If you use the Raycus PC software to control the laser, you need to find the folder where the PC software is located, open the laser configuration file “config.xml”, and write the newly laser IP address.
- Page 27 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 Figure 15 The Steps of Ethernet Connection...
-
Page 28: Work Patterns And Control Modes
Connect AC power. d） Short-circuit the SERVICE interface“POWERA” and“POWERB” to enable laser. 4.6 Selection of Control Mode Raycus provide assorted upper computer software, as shown in Figure 17(Download the Rsycus software and software manual, please log in to Raycus official website). - Page 29 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 Figure 16 The Function Area of Upper Computer Software Table 13 Brief Description of Each Functional Area Functional Area Description ‘Ready’——The laser complete ‘Laser EN’——Enable Signal Laser Indicators ‘Emission’——The laser is emitting laser...
- Page 30 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 Set parameters: Laser Power, Frequency, Duty Ratio ‘Set’——After Setting parameter, Need to click ‘set’ Laser Control “Emission on”——Pressing the button, the laser is emitting laser; button is unavailable, the laser is being shut down.
- Page 31 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 4.6.2 External RS232 Mode Operation Procedure a） Short-circuit DB25 control interface’s PIN17 and PIN18, Select external control mode. b） Ensure disconnect DB25 control interface’s PIN7 and PIN19. Enable external control RS-232 Mode.
- Page 32 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 Figure 19 Control Sequence Diagram of PLUSE Pattern in External Control RS232 Mode...
- Page 33 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 4.6.4 Wiring in External Control AD mode Figure 20 Wiring In External Control AD Mode 4.6.5 The Operation Procedure of External AD mode a） Short-circuit DB25 control interface’s PIN17 and PIN18, Select external control mode.
- Page 34 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 b） When PIN 7-9 of the DB25 control interface is applied to 24V, the laser enters the external AD mode. c） Connect to AC power, and the “Power” indicator on the front panel light on.
- Page 35 受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 4.6.7 Wiring in Internal Control Mode Figure 22 Wiring in Internal Control Mode 4.6.8 The Operation Procedure of Internal Control Mode a） Disconnect DB25 control interface’s PIN17 and PIN18, Select internal control mode.
-
Page 36: Pilot Light To Control
受 控 Wuxi Raycus Fiber Laser Technologies Co., Ltd. User Guide of Raycus 1000W～2000W laser 武汉锐科 4.6.9 The Sequence Diagram of Internal Control Mode Figure 23 Control Sequence Diagram of CW Mod in Internal Control Mode Figure 24 Control Sequence Diagram of Pulse Mod in Internal Control Mode 4.7 Pilot Light to Control... -
Page 37: Steps Of Shutting Down
Table 14 Instructions and Solutions for Alarms of Laser Alarm name Alarm instructions and solutions Instruction: The internal clock of laser is abnormal. System Timer Alarm Solution: If it displays this alarm, please contact Raycus. Laser On Button Alarm Instruction:... - Page 38 Current Driver Alarm Solution: Restart the laser, If this error continues to occur, please contact Raycus. Instruction: The laser will get this error when it does not emit with correct settings. Power Laser Power Alarm error occurs only when the laser is emitting.
-
Page 39: Warranty, Return And Maintenance
Raycus warrants that all Raycus fiber laser products are conformed to applicable product specifications under normal use and are free from defects in materials and workmanship. The warranties start on the date of shipment from Raycus for a period of time as set forth in the applicable purchase contracts or product specifications. - Page 40 All the items about warranty and service above provided by Raycus are for user’s reference; formal contents about warranty and service are subject to the contract.