Toshiba ST-B10 Series Maintenance Manual page 113

5. DIAGNOSTIC TEST OPERATION
5.4.8.3 TRST-A1x USB Printer Test
In this test, printing and error detection of the printer connected to the POS terminal are checked.
(1) Operation procedure
1. Select the TRST-A1x-U Test(7) button on the Printer Test Menu screen.
2. By clicking the Sample Printing(1) button, sample printing both on the receipt and the journal is
performed. ("Printer Test" and 1-line printing are printed both on the receipt and the journal.)
3. After the sample printing ended, move the cursor onto the Cut Count edit box, then input a value.
4. By clicking the Receipt Cut(4) button, the receipt cut is performed according to the number of Cut
Count value set in Procedure 3.
5. When the printer performs correctly, click the OK button to terminate the test. If not, click the NG
button.
(2) Error code
Result Error Code
1
-1
-1
-1
-1
Printer Setting Error Code Table
Value
1 Cover open
2 Receipt roll is not loaded into the printer.
3 Receipt is not fed to the receipt outlet.
<< Preliminary version >>
Error Code Ex
0
0
1
2 See Printer Setting Error
Code Table.
3
Error
0 Click the [OK] button to terminate the test.
0 Click the [NG] button to terminate the test.
0 Open error
Print error
Receipt cut error
5- 51
5.4 Serviceman Diagnostic Test Program
Remarks
EO18-12017