Toshiba ST-B10 Series Maintenance Manual page 110

5. DIAGNOSTIC TEST OPERATION
5.4.8.1 TRST-A1x Parallel Printer Test
In this test, printing and error detection of the printer connected to the POS terminal are checked.
(1) Operation procedure
1. Select the TRST-A1x-P Test(5) button on the Printer Test Menu screen.
2. By clicking the Sample Printing(1) button, sample printing is performed. ("Printer Test" and 1-line
printing are printed on the receipt.)
3. After the sample printing ended, move the cursor onto the Cut Count edit box, then input a value.
4. By clicking the Receipt Cut(4) button, the receipt cut is performed according to the number of Cut
Count value set in Procedure 3.
5. When the printer performs correctly, click the OK button to terminate the test. If not, click the NG
button.
(2) Error code
Result Error Code
1
-1
-1
-1
-1
(3) Corrective action
Error
Print error
Receipt cut error
<< Preliminary version >>
Error Code Ex
0
0
1
2
3
Possible causes of the error are as shown below.
• Out of paper
• The printer is shut down.
Possible causes of the error are as shown below.
• Out of paper
• The printer is shut down.
• Cutter failure
0 Click the [OK] button to terminate the test.
0 Click the [NG] button to terminate the test.
0 Open error
0 Print error
0 Receipt cut error
Cause & Measure
5- 48
5.4 Serviceman Diagnostic Test Program
Remarks
EO18-12017