Toshiba ST-B10 Series Maintenance Manual page 104

5. DIAGNOSTIC TEST OPERATION
(2) Error code
Result Error Code
1
-1
-1
-1
-1
LIU Library Error Code Table
Value
1003 device.ini read error
1004 liu.ini read error
1006 Available memory is low.
1010 liu_init() incompletion error
1013 Log initialization error
1014 Mutex creation error
1015 Mutex acquiring error
1016 Mutex open error
1017 Common memory initialization error
(3) Corrective action
Error
Initialization error
LIU display clear error
LIU display error
<< Preliminary version >>
Error Code Ex
0
0
1 See LIU Library Error Code Table.
2
3
Error
• The device may be damaged.
• The LIU is not connected to the specified COM.
• Connect the LIU to the specified COM.
0 The test is terminated successfully.
Or it is terminated by selecting the [OK]
button when no error occurs.
0 The test is terminated by selecting the
[NG] button when no error occurs.
Initialization error
LIU display clear error
LIU display error
The file "device.ini" does not exist.
Or necessary items are not contained in this file.
The file "liu.ini" does not exist.
Or necessary items are not contained in this file.
Cause & Measure
5- 42
5.4 Serviceman Diagnostic Test Program
Remarks
Remarks
EO18-12017