CAUTION! 1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA TEC. 2. The contents of this manual may be changed without notification. 3. Please refer to your local Authorised Service representative with regard to any queries you...
Usage Notice EO1-19041 Precautions Usage Notice - To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. Warning - Please do not open or disassemble the product as this may cause electric shock. Warning Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize...
Thank you for purchasing the TOSHIBA TFTST-76T-5A Series 15-inch TFT Display Unit. This display unit has been developed exclusive to the TOSHIBA ST-7000 and ST-6501-C7 series POS terminal. The display unit is equipped with a touch screen panel which adopts a high-luminance type colour LCD (15-inch TFT, 1024x768dots, 16.2 million playable colours).
Installation EO1-19041 Product Overview Installation Product Overview Front View Liquid Crystal Display (LCD Display) Magnetic Card Reader (Option) Panel Controls Stand Back View Connector Ports (Inside the back cover) RS232 Audio-in input Power-In...
Installation EO1-19041 Product Overview Tilt Turn the knob and grasp the LCD display with both hands to adjust the tilt as desired. Tilt Angle:0°~90° Knob Kensington Security slot The monitor can be secured to your desk or any other fixed object with Kensington lock security products. Kensington lock is not included.
Installation EO1-19041 VESA Mount on your monitor VESA Mount on your monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface Standard which defines a physical mounting interface for flat panel monitors, and corresponding standards for flat panel monitor mounting devices, such as wall and table arms.
Installation EO1-19041 Cable Management Cable Management Please follow the instruction to do cable management. 1. Please pull all the cables backward while the tilt angle is 0°. 2. Please pull all the cables forward while the tilt angle is 90°.
Installation EO1-19041 Start Your Installation Start Your Installation Connecting the Display(Figure 10.1) To setup this display, please refer to the following figure and procedures. 1. Be sure all equipment is turned off. 2. Connect the DC power cord to the power connector; plug one end of the AC power cord into the power adapter, and the other end into an electrical outlet ( ).
Installation EO1-19041 Start Your Installation When connecting the TFTST-76 to the ST-7000-WM-2E TFTST-76 ST-7000-WM-2E Rear View Powered USB USB0 USB1 USB2 USB3 Line-out (12V-1) (12V-2) (12V-3) (24V) COM1 or COM2 RS-232C (*1) COM1 Audio-In Line-out COM2 USB4 USB0 to USB4 *1: COM1 or COM2 is provided as a touch panel interface.
User Controls EO1-19041 Front Panel Controls User Controls Front Panel Controls No / Icon Control Function Power Switch To switch on/ off the power to the LCD Display. 1. Green indicates the display is turned on. Power LED 2. Amber indicates the display is in power-saving mode.
User Controls EO1-19041 How to Use the OSD Menus How to Use the OSD Menus 1. Press the "MENU" button to pop up the “on-screen menu” and to select among the four Main Menus. 2. Choose the adjustment items by pressing the “Select/Auto” button. 3.
User Controls EO1-19041 On-Screen Display Menus On-Screen display Menus Main Menu Menu Level 2 Function Description Auto-Adjustment Choose this function to obtain an optimum image. Contrast Adjusts the contrast of the display image. Brightness Adjusts the brightness of the image. Horizontal Position Changes the horizontal position of the image.
Magnetic Card Reader (Option) EO1-19041 How to Read a Magnetic Card Magnetic Card Reader (Option) Warning! Do not apply too much pressure onto the card reader or lean against it. Doing so may damage it. The MCRST-76-55K series optional magnetic card reader can be installed to the right side of the TFTST-76-5A.
General Maintenance EO1-19041 Cleaning General Maintenance Cleaning Warning! 1. Be sure to disconnect the power cord of the POS terminal prior to performing any maintenance. 2. Do not pour water directly on or wipe the LCD with a soaked cloth, as this may cause fire, electric shock, or machine failure.
Appendix EO1-19041 Troubleshooting Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following trouble shooting. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. Check that all the I/O and power connectors are correctly and well connected as described in the “Installation” section.
Appendix EO1-19041 Warning Signal Warning Signal Sometimes you may see warning messages for this LCD Display. This means that the LCD Display cannot correctly receive the signal from the computer graphics card. There are three kinds of situations that may happen. Please check the cable connections or contact your local dealer for more information.
Appendix EO1-19041 Product Dimensions Product Dimensions Front View Side View Top View...
English Waste Recycling information for users: Following information is only for EU-member states: The crossed out wheeled bin symbol is used to indicate that the product must not be treated as general household waste. By ensuring that this product is disposed of correctly you will be helping to prevent potentially negative consequences for the environment and human health, which could otherwise be caused by incorrect waste handling of this product.