Safety Precautions And Warnings; General; Check Voltage; Power Consumption, Fuse - Nilfisk-Advance ALTO B23 Stainless Operating Instructions Manual

4 Safety precautions and warnings

4.1

General

4.2

Check voltage

4.3 Power consumption,
fuse
4.4

Mains power connection

Bedieungsanleitung auf www.gluesing.net
Upon the unpacking of your Nilfisk-ALTO B23 brake washer you
should check it for any defects. If you find any, we kindly ask you to
contact your nearest Nilfisk-ALTO distributor.
Check that the voltage stated on the model tag corresponds to your
mains voltage.
Check the power consumption stated on the model tag and then
check that the fuse is correct.
The electric cable should be protected by a 13 A slow-blow fuse.
The domestic installation must be protected by a 10 A fuse and a
HFI relay.
WARNING!
Faulty connection of the machine can cause electric shock.
1. To protect against short-circuits all live wirings, especially ca-
bles and electrical components in the working field, should be
splash-proof.
2. Only connect the machine to an installation with earth con-
nection. If you are in any doubt about the earth connection,
please contact a qualified electrician for correct installation.
3. Electric cables should be faultless and without any cracks -
never use a damaged cable.
4. Never touch any plug and socket with wet hands. If you are in
any doubt, please contact a qualified electrician or your near-
est Nilfisk-ALTO distributor.
5. We recommend that you connect the machine to a power
source with a Residual Current De vice (RCD), which will
disconnect the power supply if the leakage current exceeds
30mA for 30 milli seconds.
6. The electric supply connection shall be made by a qualified
electrician and comply with the latest edition of the IEC Wiring
Regulations.
41