Terminal Module Tm54F - Siemens SIMOTION D45 Series Manual

Spare parts/accessories

6.7 Terminal Module TM54F

6.7 Terminal Module TM54F
Features of the TM54F
The TM54F offers secure digital inputs/digital outputs for control of secure motion monitoring
functions.
The TM54F is connected by means of DRIVE-CLiQ. Additional stations (e.g., TMxx, SMxx,
MMxx) can be connected to the same DRIVE-CLiQ line, but not another TM54F.
TM54 is equipped with the following terminals:
Table 6-4
Type
Digital inputs
Digital outputs
Caution
The 50 mm clearances above and below the component must be observed.
Additional references
You will find detailed information about the TM54F Terminal Module in the
SINAMICS System Components for SIMOTION
64
TM54 interface overview
Quantity
20
4
Manual.
Supplemental
D4x5
Manual, 03/2007 Edition