Table 2-3 Error And Status Displays - Siemens SIMOTION D45 Series Manual

Meaning of the LED displays
This table describes the LEDs and their meaning.
Table 2-3
LED
RDY
RUN
STOP
SU/PF
SF
DP1
DP2
OPT
Note
While the SIMOTION D4x5 is ramping up, all LEDs are briefly illuminated in yellow.
Additional information
You can carry out a detailed diagnosis using a PG/PC and the Engineering System. For
information about diagnostics using LED displays, refer to the
Commissioning Manual, /1/.
D4x5
Manual, 03/2007 Edition
Error and status displays
Meaning
... indicates the state of the integrated drive.
... indicates that the user program is running.
... indicates that a user program is not running.
The technology packages are not active.
... indicates that the technology packages are active.
The user program is not active.
... indicates an error state of the SIMOTION D4x5.
... indicates the state of the PROFIBUS DP1 interface.
... indicates the state of the PROFIBUS DP2/MPI interface.
... indicates the state of the option module (if available).
Operator control (hardware)
2.3 LED displays
SIMOTION D4x5
31