About This Guide; Scope; Related Information; Reporting Problems With This Guide - Eaton SC200 Operation Handbook

About This Guide

Scope

This guide covers operation of the SC200 system controller with embedded software Version 4.

See SC200 Identity Information on page
Audience
This guide is intended for use by:
Installers competent in:
installing and commissioning dc power systems
safe working practices for ac and dc powered equipment
the relevant local electrical safety regulations and wiring standards
Operators and maintenance staff competent in:
operation of dc power systems
safe working practices for ac and dc powered equipment

Related Information

PowerManagerII Online Help
DCTools Online Help
SiteSure-3G Installation and Operation Guide – IPN 997-00012-51
CellSure Installation Guide – IPN 997-00012-20

Reporting Problems with this Guide

Please use this email address to report any problems you find in this guide:
Eaton DC Product Marketing Communications
EMAIL: DCMarketingNZ@eaton.com

For Further Information and Technical Assistance

For further information and technical assistance see Worldwide Support on page 125.

Third Party Software

This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).
This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/).


Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-50H
About This Guide
14 to determine the version of the embedded software.
November 2011
i