Sc200 System Controller; Input/Output Board - Eaton SC200 Operation Handbook

SC200 Handbook

SC200 System Controller

The SC200 system controller is an advanced control and monitoring solution which provides a
full suite of communications options, including built-in Ethernet interface, Web server, and
SNMP agent.
Alarm notifications may be by Email, SNMP traps, SMS text messaging, dial-out to
PowerManagerII remote monitoring software, or relay contact closures.
The SC200 is supplied pre-configured with either a default configuration file, or with one
factory customized for a particular application. Some configuration file changes can be made
with the keypad, or all settings can be changed via a PC connected to the USB interface (see
details on page 18).
For connector pin-outs see details on page 113. See Troubleshooting on page
SC200 alarm LEDs.

Input/Output Board

The input/output (I/O) board provides the I/O interfaces and connections for the SC200
system controller.
The I/O board includes a range of sense inputs for dc power system control and monitoring. It
also allows real time data collection from building services and other external devices, and relay
outputs for alarm signals or control of external devices.
2
Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-50H

Power on LED (green)

Minor alarm LED (yellow)

Critical/Major alarm LED (red)

Color LCD

Soft keys (2)

Navigation keys (4)

USB 1.1 connector (12Mb/s)

Retaining screw

Power and system
communications connector

RS232 connector

Ethernet connector and
status LEDs
November 2011
100 for details of