6.8. Command set
6.8.1. General Description of the Command set
It is the main command to set the required values within the RPCM work setup.
Below is a brief list of keys for the command set with comments:
action confirmation — set confirmation of critical actions for the web-interface;
all — used with second level key
api — REST API access setting;
automation — automation functions settings;
buzzer — control of the sound signal;
display — set up parameters on the front indicator panel;
system security group settings;
group —
input — for managing the input, allows you to set up a variety of settings for each of the
inputs;
output — for managing the outlet, allows you to set up a variety of settings for each of the
outlets;
radius server — settings of server RADIUS;
snmp — settings of
time — time settings;
user — settings for the user;
group — group settings;
help — call help.
You can use the TAB key for auto-completion (prompts) and the service word
tion mark
for displaying information about valid parameters.
?
The output of the command
RPCM Commands description:
set action confirmation - set confirmation of actions for the web interface
enabled
disabled
set all inputs
force failback
delay
outputs
SNMP;
configuration
set ?
to enabled (will double check dangerous actions)
to disabled
- set input force failback
configuration (available on RPCM1502/RPCM1532)
set stabilization delay
6. Command Reference of RPCM CLI
to disable all outlets of the RPCM;
or the ques-
help
281