Command Help - RCNTEC RPCM Series User Manual

6.2. Command help

6.2.1. Getting List of Commands
At the prompt, enter
Example:
help
The return is:
PCM Commands description:
add - add configuration for rpcm subsystems: ntp, snmp, etc.
cancel - cancel update procedure
delete - delete configuration elements for rpcm subsystems: ntp, snmp etc.
exit - exit from command line interface
help - show this help
quit - quit command line interface
restart - restart outputs, internal-controller and interface-controller
start - start update procedure
set - set outputs on/off, input parameters, buzzer, etc.
show - show inputs, outputs, snmp, etc. information
whoami - show current user's username
6.2.2. Getting Help for a Specific Command
After the command, enter the service word
procedure can be repeated repeatedly to obtain an exhaustive result.
Example:
set ?
The return is:
RPCM Commands description:
set all outputs
off
on
set action confirmation - set confirmation of actions for the web interface
enabled
disabled
set api
generate-new-key
key
set automation
device-name <name>
set button control mode - set button control mode
enabled
disabled
set buzzer
alternate
or the question mark
help
- set all outputs state
turn them off
turn them on
to enabled
to disabled
- set api options
generate new API access key
enables or disables existing key
- set automation parameters
for particular device with name
to enabled
to disabled
- set buzzer state
make it alternate
?
or question mark
help
6. Command Reference of RPCM CLI
or simply press Enter. This
?
227