Updating The Rpcm Software - RCNTEC RPCM Series User Manual

4. Description of the RPCM Device
DELETE button is intended to remove the server. After clicking DELETE button a confirmation
window will appear to confirm the deletion of this RADIUS server record.
Figure 4.6.65. "Delete RADIUS server" window.
4.6.17. Restart RPCM HLC
Panel of number 13 (see Figure 4.6.9.) — for restarting High Level Controller.
Figure 4.6.66. "Restart RPCM HLC" panel.
To restart High Level Controller press RESTART button.
During restart of HLC (High Level Controller) you will not be able to log on to RPCM, control it via
Web, SSH, SNMP and REST API interfaces and Automations will be suspended.
Note. Some details about RPCM Software and Firmware.
RPCM uses 3 controllers:
High Level Controller (HLC), which runs Software;
Low Level Controller (LLC), which runs Firmware;
Display Controller, which runs Display Firmware.
Low Level Controller is responsible for low level operations such as input and outlet management, ATS (for RPCM AC ATS
16A, RPCM AC ATS 32A, RPCM DC ATS 76A), meters, overload and short circuit protection.
Display Controller is responsible for external displays.
High Level Controller is responsible for the user interfaces, including web interface, SSH CLI, REST API, SNMP and so on.
Software updates may include Firmware updates.

4.7. Updating the RPCM Software

4.7.1. General Information
This section describes the software update for the Resilient Power Control Module (RPCM).
You can access this section by using the menu item Navigation Update or by typing: https://
<name_or_IP_RPCM>/update/ in the browser line (provided that authentication was successful
before).
117