Safety Instructions; Pressure Equipment Directive; Certificate Of Conformity Tr Cu (Eac Marking) - Tecfluid AD Series Instruction Manual

18

SAFETY INSTRUCTIONS

The series AD flowmeters are in conformity with all essential
requirements of all EC directives applicable to them:
2014/68/EU
Limit switches and transmitters:
2014/30/EU
2012/19/EU
Equipment for hazardous areas:
2014/34/EU
In the last sections of this manual the EC type certificate and the
declarations of conformity according to the ATEX directive are
attached.
Other declarations of conformity EC can be downloaded from the section "Download" of the
Tecfluid S.A. website.
18.1

Pressure equipment directive

Tecfluid S.A. have subjected the series AD to a conformity assessment method for the
pressure equipment directive, specifically according to module H (full quality assurance).
Conformity with the directive is reflected by the CE marking in each pressure equipment and
by the written declaration of conformity. The CE marking is accompanied by the identification
number of the notified body involved at the production control phase.
The marking of the equipment takes into account the fluid type, the group of fluid and the
category, for example: G1 CATII
G Gases and vapours
1 Group of liquids 1
CATII Category II
Devices that, due to their size, are rated as Category I are not within the scope of the
directive and therefore they have not the CE mark according to pressure directive. These
devices are subject to applicable sound engineering practice (SEP).
This equipment is considered as being a pressure accessory and NOT a safety accessory as
defined in the 2014/68/EU directive, Article 2, paragraph 4.
18.2 Certificate of conformity TR CU (EAC marking)
Tecfluid S.A. have subjected the series AD of flowmeters to a
certification procedure according to the technical regulations of the
Customs Union of the Eurasian Economic Union (EEU).
This Certificate is an official document confirming the quality of production with the standards
on the territory of the Customs Union, particularly regarding safety requirements and
electromagnetic compatibility.
Pressure equipment directive (PED)
Electromagnetic compatibility directive (EMC)
Waste electric and electronic equipment (WEEE).
Equipment and protective systems intended for use
in potentially explosive atmospheres (ATEX).
22