Safety Instructions; Pressure Equipment Directive; Certificate Of Conformity Tr Cu (Eac Marking) - Tecfluid M21 Series Instruction Manual

19

SAFETY INSTRUCTIONS

The series M21 flowmeters are in conformity with all essential
requirements of all EC directives applicable to them:
2014/68/EU
Limit switches and transmitters:
2014/30/EU
2012/19/EU
Equipment for hazardous areas:
2014/34/EU
In the last sections of this manual the EC type certificate and the
declarations of conformity according to the ATEX directive are
attached.
Other declarations of conformity EC can be downloaded from the section "Download" of the
Tecfluid S.A. website.
19.1

Pressure equipment directive

Devices of series M21, due to their size, are rated as Category I are not within the scope of
the directive and therefore they have not the CE mark according to pressure directive. These
devices are subject to applicable sound engineering practice (SEP).
This equipment is considered as being a pressure accessory and NOT a safety accessory as
defined in the 2014/68/EU directive, Article 2, paragraph 4.
19.2 Certificate of conformity TR CU (EAC marking)
Tecfluid S.A. have subjected the series M21 of flowmeters to a
certification procedure according to the technical regulations of the
Customs Union of the Eurasian Economic Union (EEU).
This Certificate is an official document confirming the quality of production with the standards
on the territory of the Customs Union, particularly regarding safety requirements and
electromagnetic compatibility.
Pressure equipment directive (PED)
Electromagnetic compatibility directive (EMC)
Waste electric and electronic equipment (WEEE).
Equipment and protective systems intended for use
in potentially explosive atmospheres (ATEX).
32