Minolta MNCD60 User Manual page 19

4.2.21 Beep Sound
This menu allows you to enable or disable the button press "beep" sounds.
1. In Capture Mode press the MENU button. Select 'Beep Sound' by using the UP or
DOWN buttons to scroll through the menu pages.
2. Press the OK button to enter the 'Beep Sound' submenu.
3. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Enable and Disable.
4. Press the OK button to confirm your selected setting.
5. To exit the settings menu, press the MENU button and your camcorder will return to
Capture Mode and will automatically begin recording.
4.2.22 Language
This settings allows you to set the language of the dashcam menu.
1. In Capture Mode press the MENU button. Select 'Language' by using the UP or DOWN
buttons to scroll through the menu pages.
2. Press the OK button to enter the 'Language' submenu.
3. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
Press the OK button to confirm your selected setting.
4. To exit the settings menu, press the MENU button and your camcorder will return to
Capture Mode and will automatically begin recording.
4.2.23 Frequency
This setting allows you to set the power frequency of your camcorder and is dependent on
the region that the camcorder is being used in.
1. In Capture Mode press the MENU button. Select 'Frequency' by using the UP or DOWN
buttons to scroll through the menu pages.
2. Press the OK button to enter the 'Frequency' submenu.
3. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from 50 Hz and 60 Hz. The setting for North America is 60Hz.
4. Press the OK button to confirm your selected setting.
5. To exit the settings menu, press the MENU button and your camcorder will return to
Capture Mode and will automatically begin recording.
18