Minolta MNCD60 User Manual page 16

4.2.13 Collision Sensitivity
This setting allows you to set the sensitivity level for automatic recording upon collision.
When triggered or when the camcorder thinks a collision occurred, it will automatically lock
the recording. The video file will be locked and placed in the Locked Videos folder.
1. In Capture Mode press the MENU button. Select 'Collision Sensitivity' by using the UP
or DOWN buttons to scroll through the menu pages.
2. Press the OK button to enter the 'Collision Sensitivity' submenu.
3. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off, Low, Middle and High.
4. Press the OK button to confirm your selected setting.
5. To exit the settings menu, press the MENU button and your camcorder will return to
Capture Mode and will automatically begin recording.
4.2.14 Parking Sensitivity
This setting allows the camcorder to automatically power on and record a video clip if the
camcorder detects a collision while parked and is powered off. You can set the sensitivity
level setting in this menu. This setting will only activate if there is sufficient battery power
remaining in the camcorder's built-in battery. When triggered or when the camcorder thinks
a collision occurred, it will automatically lock the recording. The video file will be locked and
placed in the Locked Videos folder.
1. In Capture Mode press the MENU button. Select 'Parking Sensitivity' by using the UP or
DOWN buttons to scroll through the menu pages.
2. Press the OK button to enter the 'Parking Sensitivity' submenu.
3. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off, Low, Middle and High.
4. Press the OK button to confirm your selected setting.
5. To exit the settings menu, press the MENU button and your camcorder will return to
Capture Mode and will automatically begin recording.
4.2.15 Speed Unit
This menu allows you adjust the speed rating for the Speed Limit Alert.
1. In Capture Mode press the MENU button. Select 'Speed Unit' by using the UP or
DOWN buttons to scroll through the menu pages.
2. Press the OK button to enter the 'Speed Unit' submenu.
3. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from km/h and mph.
15