Toyota LAND CRUISER PRADO Owner's Manual page 810

 1KD-FTV engine
Oil capacity
(Drain and refill reference
With filter
Without filter
* 1
: The engine oil capacity is a reference quantity to be used when changing
the engine oil. Warm up and turn off the engine, wait more than 5 minutes,
and check the oil level on the dipstick.
Engine oil selection (except for EURO IV models
■
*
2
: EURO IV is an emission standard. If it is not clear that your vehicle meets
relevant standards, contact your Toyota dealer.
"Toyota Genuine Motor Oil" is used in your Toyota vehicle. Use
Toyota approved "Toyota Genuine Motor Oil" or equivalent to sat-
isfy the following grade and viscosity.
Oil grade: API CF-4, CF or ACEA B3, B4, B5 or JASO DL-0
Recommended viscosity (SAE):
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures,
the engine may become difficult
to start, so SAE 5W-30 engine
oil is recommended.
LC150_OM_OM60R93E_(GE)
*
1
)
7.0 L (7.4 qt., 6.2 Imp.qt.)
6.7 L (7.1 qt., 5.9 Imp.qt.)
Temperature range anticipated
before next oil change
9-1. Specifications
2
*
)
809
9