Toyota LAND CRUISER PRADO Owner's Manual page 327

326
4-3. Operating the lights and wipers
Turning on the high beam headlights
With the headlights on, push
1
the lever away from you to turn
on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
2
release it to flash the high
beams once.
You can flash the high beams with the headlights on or off.
Follow me home system (if equipped)
This system allows the headlights and front position lights to be turned
on for 30 seconds when the engine switch is off.
Pull the lever toward you and
release it with the light switch is in
or
engine switch off.
Pull the lever toward you and
release it again to turn off the
lights.
Manual headlight leveling dial (if equipped)
The level of the headlights can be adjusted according to the number
of passengers and the loading condition of the vehicle.
Raises the level of the head-
1
lights
Lowers the level of the head-
2
lights
LC150_OM_OM60R93E_(GE)
after turning the