Toyota LAND CRUISER PRADO Owner's Manual page 285

284
4-1. Before driving
■ When connecting and disconnecting a trailer (vehicles with rear height
control air suspension)
Connecting
●
Set the rear height control air suspension to LO mode.
1
Turn off the engine switch or the rear height control air suspension.
2
Connect the trailer.
3
Turn on the switch that was turned off on step
4
Set the rear height control air suspension to N mode.
5
Disconnecting
●
Set the rear height control air suspension to LO mode.
1
Turn off the rear height control air suspension.
2
Turn off the engine switch.
3
Set the supporting leg of a trailer on the ground and raise the hitch by 100
4
mm (4 in.).
Turn on the engine switch.
5
Turn on the rear height control air suspension.
6
Wait until vehicle height is stabilized.
7
Make sure the hitch is disconnected. If the hitch does not disconnect, raise
the hitch higher and repeat steps
LC150_OM_OM60R93E_(GE)
.
2
through .
2 7