168
3-2. Opening, closing and locking the doors
Setting and canceling the functions
■
To switch between setting and canceling, follow the procedure
below.
Close all the doors and turn the engine switch to IGNITION ON
1
mode. (Perform step 2 within 20 seconds.)
Shift the shift lever to P or N,
2
and press and hold the
driver's
(
mately 5 seconds and then
release.
The shift lever and switch posi-
tions
desired function to be set are
shown in the following table.
Use the same procedure to cancel the function.
Shift position linked door locking
*
function
Shift position linked door unlock-
ing function
Speed linked door locking func-
tion
Driver's door linked door unlock-
ing function
*
: Vehicles with an automatic transmission
When the setting or canceling operation is complete, all the doors are
locked and then unlocked.
LC150_OM_OM60R93E_(GE)
door
lock
switch
or
) for approxi-
corresponding
to
the
Function
*
Driver's door lock
Shift lever position
P
N
switch position