Page 1
3 IN 1 AUTOMOTIVE PIPE BENDER MODEL NO: CHT264 PART NO: 1801264 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0221- rev 1...
Page 2
INTRODUCTION Thank you for purchasing this CLARKE Pipe Bender. Before attempting to use the pipe bender it is essential that you read this manual thoroughly and carefully follow all instructions given. In doing so you will ensure the safety of yourself and that of others around you, and you can also look forward to the product giving you long and satisfactory service.
Page 3
COMMON BEND (Shown aligned for 90 bend) For common bending, open arms of tubing bender to position shown above. Insert tubing into correct size channel. Align “0” mark on roll guide with “0” mark on bending die. For a 90 deg bend, align the BEND mark made earlier with the “L”...
Page 4
REVERSE BEND GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.