Daikin Perfera RXM R Series Service Manual page 152

3 | Components
To remove the front plate
To remove the switch box
Service manual
152
DANGER: RISK OF ELECTROCUTION
Wait for at least 10 minutes after the circuit breaker has been turned OFF, to be sure
the rectifier voltage is below 10 V DC before proceeding.
2 Loosen and remove the screws that fix the top plate.
a b a
a Screw
b Top plate
3 Remove the top plate.
INFORMATION
This procedure is just an example and may differ on some details for your actual unit.
Prerequisite: Remove the top plate, see
1 Loosen and remove the screws that fix the front plate.
a
a
a Screw
b Front plate
2 Remove the front plate.
INFORMATION
This procedure is just an example and may differ on some details for your actual unit.
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
Prerequisite: Remove the required plate work, see
1 Remove the insulation on the upper side of the switch box.
a a a a
"3.14 Plate work" [
a a
a a
"3.14 Plate
RXM20~71R + ARXM25~71R + FTXM20~71R + ATXM25~50R +
4
151].
4
work" [ 151].
FVXM25~50A
Split New Perfera R32
ESIE20-11 – 2021.01