Table of Contents
Advertisement
OLYMPIA CM 1856F _______________________Programming Instruction___________________________________
Clerk system:
Prior to the operation entry the Clerk logs in via a Clerk key (standard 26 keys). This system can be affected in the PRG
mode (i.e. it can be entirely turned off). A change of Clerk (i.e. key) is not feasible before the completion of the
appropriate operation. The system may be designed to eliminate (or to restrict) the system of keys and Cash Register
shall require log-in code - PASSWORD (not ID Code).
_
The Cash Register indicates on display a question for entering the PASSWORD. If the data (1 character) is entered, the
display is changed. (For example, when entering two characters ....)
_
After all PASSWORD characters have been entered, the Clerk will be permitted to work. If the Cash Register displays a
character "0", PASSWORD is not correct and entering can be repeated after pressing the key
CM 1856F Operator system Bakery - Firmware
Floting clerk function
In front of the petition of a transaction the operator applies over an operator button (or key).
This system can in the PRG -- mode be influenced i.e., it can be turned off.
Several operators can be registered at the same time.
The operator: 1 applies and starts with his bookings.
The operator can interrupt his booking any time, without which the register is closed.
The operator: 2 can apply over the operator button (or key) now, execute his bookings and lock [CASH] or also interrupt
his booking.
The operator:1 applies on, again over the operator button (or key) his balance is shown automatically and he can
continue his booking.
Attention
As long as an operator is registered the lock position of „R" cannot be changed . Cancel operators first push the
button through [TRACK = SALDO] . (lay out button)
Manager – System:
The Cash Register enables to program a secret entry "PASSWORD" for manager allowing for an exclusive access to
operations in Z and PRG key positions or only to the operations in PRG position (i.e.. Z – reports, programming).
PASSWORD consists of four characters and the entry system is identical with the entry of Clerks' PASSWORD.
_
_
_
_
_
_
_
_
_
_
_
_
X
X
X
_
_
_
*
X
X
_
_
_
[
Page
5
].
Advertisement
Table of Contents
