Flex LW 1503 Instruction Manual page 5

LW 1503
(f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
Loose clothes, jewellery or long
parts.
hair can be caught in moving parts.
(g) If devices are provided for the con-
nection of dust extraction and collection
facilities, ensure these are connected and
Use of dust collection can
properly used.
reduce dust related hazards.
2. Power tool use and care
(a) Do not force the power tool. Use the
correct power tool for your application.
correct power tool will do the job better
and safer at the rate for which it was
designed.
(b) Do not use the power tool if the switch
does not turn it on and off.
that cannot be controlled with the switch
is dangerous and must be repaired.
(c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-ments,
changing accessories, or storing power
Such preventive safety measures
tools.
reduce the risk of starting the power tool
accidentally.
(d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
dangerous in the hands of untrained
users.
(e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation. If
damaged, have the power tool repaired
Many accidents are caused
before use.
by poorly maintained power tools.
(f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
The
Any power tool
Power tools are
(g) Use the power tool, accessories and tool
bits etc., in accordance with these
instructions and in the manner intended for
the particular type of power tool, taking into
account the working conditions and the
work to be performed.
tool for operations different from those
intended could result in a hazardous
situation.
2. Service
(a) Have your power tool serviced by
a qualified repair person using only identical
replacement parts.
the safety of the power tool is
maintained.
Instruction manual
Use of the power
This will ensure that
5