Bios Security Features Setup Page - MATSONIC MS9087C Manual

This item indicates if the primary graphics
Primary
adapter uses the PCI or the AGP bus. The
Graphics
default AGP setting still lets the onboard
Adapter
display work and allows the use of a second
display card installed in an AGP slot.
If this item is enabled, an IRQ will be
Allocate IRQ
assigned to the PCI VGA graphics system.
to PCI VGA
You set this value to No to free up an IRQ.
This item enables or disables the DMA
PCI IDE
under DOS mode. We recommend you to
BusMaster
leave this item at the default value.

BIOS Security Features Setup Page

This page helps you install or change a password.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Security Settings
Supervisor Password : Not Installed
Change Supervisor Password
This item indicates whether a supervisor
Supervisor
password has been set. If the password has
Password
been installed, Installed displays. If not, Not
Installed displays.
You can select this option and press <Enter>
Change
to access the sub menu. You can use the sub
Supervisor
menu to change the supervisor password.
Password
BIOS Security Features Setup
Press Enter
25
Help Item
Install or Change
the password.