Link Configuration Submenu - Funkwerk bintec R4100 User Manual

Frame Relay
2

Link Configuration Submenu

The L C
INK ONFIGURATION
tains example values.)
R4300 Setup Tool
[FRAME RELAY][LINK]: Frame Relay Link Configuration
Select link to configure
si4-0
EXIT
➜
The FR L C
INK ONFIGURATION
the Frame Relay interface.
This menu lists the available links that may be configured as the transport layer
of a Frame Relay interface.
The list of available links displayed here is a combination of hardware (modules
installed) and software interfaces.
■
Hardware interfaces (Serial)
Depending on which modules are installed, the system creates initial links
six-y.
■
Software interfaces (WAN partner)
Each Frame Relay compatible entry configured on the system will be dis-
played.
Configuration is carried out in FR
Link Configuration Submenu
menu is described below. (The screenshot con-
Funkwerk Enterprise Communications GmbH
menu contains the settings relating to layer 2 of
➜
L C
INK ONFIGURATION
MyGateway
➜
EDIT.
bintec User's Guide 7
2