Submenu Incoming Call Answering - Funkwerk bintec R4100 User Manual

ISDN BRI
2 Submenu Incoming Call Answer-
ing
The I C A
NCOMING ALL NSWERING
R4100 Setup Tool
[SLOT 2 UNIT 0 ISDN BRI][INCOMING][ADD]
Item
Number
Mode
Bearer
SAVE
The ISDN BRI2: ➜ I
X NCOMING
assigning the available ISDN numbers to the desired services (e.g. PPP routing,
➤➤
ISDN Login).
If you use the BRI for incoming and outgoing dialup connections, you must enter
the own numbers for this interface (these settings are not possible for leased
lines). The gateway distributes the incoming calls to the internal services ac-
cording to the settings in this menu. Outgoing calls include the own number as
calling party number.
The gateway supports the following services:
■
PPP (Routing):
➤➤
The PPP (routing) service is the gateway's general routing service.
This connects e.g. ISDN-WAN partners' data connections to your
➤➤
LAN. This enables partners outside your own local network to access
hosts within your LAN. This subsystem also enables outgoing data connec-
tions to be set up to ISDN-WAN partners.
■
ISDN Login:
➤➤
The ISDN Login
➤➤
cess to the SNMP shell

Submenu Incoming Call Answering

submenu is described below.
Funkwerk Entreprise Communication GmbH
PPP (routing)
right to left
any
CANCEL
C A ➜ ADD/EDIT submenu is for
ALL NSWERING
service allows incoming data connections with ac-
of the gateway as well as outgoing data con-
2
MyGateway
bintec User's Guide 9