6 Assembling the Blower
6.2
Mounting the Blower Tube
1
2
3
► Slide "clamp with throttle cable holder" (2) onto the
manifold (1).
► Push the pleated hose (3) onto the elbow (1).
The corrugated hose (3) is flush with the manifold (1).
► Push the "clamp with throttle cable holder (2) onto the
pleated hose (3) as far as it will go and align it so that the
screw eye (5) points downwards.
► Insert and tighten down the screw (4) firmly.
3
6
7
► Push clamp (6) onto the blower tube (7).
► Push the blower tube (7) into the corrugated hose (3) as
far as it will go.
► Align the blower tube (7) so that the handle (10) points
upwards.
► Push the clamp (6) onto the pleated hose (3) as far as it
will go and align it so that the screw eye (9) points
downwards.
0458-452-0121-H
4
5
10
8
9
► Insert and tighten down the screw (8) firmly.
BR 500
13
14
BR 550 / BR 600
13
14
► Align the peg (13) with the slot (12).
► Push blower tube (11) into required position on blower
tube (14).
► Rotate blower tube (11) until it engages.
6.3
Attaching the Nozzle
► Shut off the engine.
English
12
11
11
12
11