Shut Off The Engine; Checking The Blower; Checking The Controls; Checking The Nozzle - Stihl BR 500 Instruction Manual

English
9.4

Shut off the engine

1
► Move the Master Control Lever (1) to position
The engine stops and the Master Control lever (1) springs
back to position .
If the engine does not stop:
► Move the choke lever to position
The engine stops.
► Do not use the blower. Consult a STIHL servicing
dealer.
The Master Control lever is defective.

10 Checking the Blower

10.1 Checking the controls

Shut off the engine
► Start the engine.
► Move the Master Control Lever to position
The engine stops.
► If the engine does not stop:
► Move the choke lever to position
The engine stops.
► Do not use the blower. Consult a STIHL servicing
dealer.
The Master Control lever is defective.
16

10.2 Checking the nozzle

► Shut off the engine.
.
► Check whether the wear mark on the blower tube is
► If there is no visible wear mark on the blower tube: Do not
.
► If you have any doubts, be sure to consult a STIHL dealer.

11 Operating the Blower

11.1 Holding and Guiding the Blower

.
.
► Carry the blower on your back.
► Hold the blower unit by the operating handle with your
visible.
use the blower and contact your STIHL dealer for
assistance.
right hand so that your thumb encloses the control handle.
10 Checking the Blower
0458-452-0121-H