Configure Connection 1 For Pppoa - D-Link DSL-G604T Quick Installation Manual

Configure Connection 1 for PPPoA

To configure the default connection type (PPPoA) for Connection 1,
follow the steps listed below. To change the connection type of
Connection 1 to an alternative type follow the instructions according to
the desired type as described below in change the connection type.
Click the
Connection 1
button to view
the PPPoA
Connection
Setup menu
pictured.
Type the
Username and
Password used
for your account.
Select PPPoA
from the Type,
VPI: and VCI: -
if these values
are not correct,
change these
according to the
instruction of
your ISP.
Click the
Apply button
after you have
entered the
account
information.
9