Configure Connection 1 For Clip - D-Link DSL-G604T Quick Installation Manual

Configure Connection 1 for CLIP

To configure the WAN connection for CLIP, perform the steps listed
below. Some of the settings do not need to be changed when you first set
up the device but can be changed later if you choose.
Click the
Connection 1
button to view
the CLIP
Connection
Setup menu
pictured.
Select CLIP from the
Type, VPI: and VCI:
- if these values are
not correct, change
these according to
the instruction of
your ISP.
Enter the IP Address
and ARP Server
the Default Gateway
change these
according to the
instruction of your ISP.
Click the Apply
button after you have
entered the account
information.
and
17