Heartway Medical Products S26 User Manual page 7

19. Operating in rain, snow, salt, mist conditions and on icy or slippery surfaces may have an adverse affect on the electrical system.
20. Never sit on your scooter when it is being used in connection with any type of lift or elevation product. Your scooter is not designed
with such use in mind and any damage or injury incurred from such use is not the responsibility of Heartway.
21. Surfaces of the power scooter that can come into direct contact with the occupant's skin and/or assistant's skin during normal use
and that are within occupant reach shall not exceed 41 °C. The motor surface can reach temperatures greater than 41°C after driving.
Do not touch these parts when disassembling the scooter or wait until the motor is cooled down.
22. The programming of the controller shall only be carried out by personnel, which is authorized by his manufacturer. A wrong
programming can result in safety hazards for the occupant!
23. If the power scooter is switched off while driving on the horizontal at maximum speed at 9 km/h, it will come to a stop with the
maximum stopping distance of 1.8 m. Please consider this distance when driving.
24. Drive-wheel needs to be switched to engaged-mode while transporting the power scooter with a car or airplane.
25. Surface temperatures can increase when exposed to external sources of heat.
◆ Modifications
Heartway Medical Product has designed and engineered power scooter to provide maximum utility. However, under no circumstances
should you modify, add, remove, or disable any part or function of your power scooter. Personal injury and damage to the power scooter
may result.
1. Do not modify your power scooter in any way not authorized by Heartway. Do not use accessories if they have not been tested or
approved for Heartway products. Changing of controller parameter shall be only performed by authorized technicians due to the
safety concern.
2. Get to know the feel of your power scooter and its capabilities. Heartway recommends that you perform a safety check before
each use to make sure your power scooter operates safely.
◆ Inspections prior to using your power scooter:
1. If equipped with pneumatic tires, please check for proper tire inflations.
2. Please check all electrical connections and make sure they are tight and not corroded.
3. Please check all harness connections and make sure they are secured properly.
4. Please check the brakes.
06