2RB/2RC/2RD/2RF/3R6
(4-2) Detaching and reattaching the eject unit/the pressure release unit
Procedures
1. Open the right cover (a).
2. After pushing up the container lock lever, release
the lock.
3. Remove to pull out the container.
4. In a similar way remove each color of the container
in following procedures
Figure 4-105
5. Open the rear cover (a).
6. Detach two screws (b) (M3><8P tight).
7. After twisting the right rear cover (c), release two
back of the protrusions (d), remove in the direction
of the arrow.
Figure 4-106
4-55