2RB/2RC/2RD/2RF/3R6
Note 2 when attaching the upper front cover
When attaching the upper front cover (a), take care not to
have the sponge (b) rub the USB wire holder (c).
Figure 4-182
13. Release two hooks (b), remove the eject fan motor
(c).
14. Detach two screws (d)(M3x8).
15. Detach two screws (e) (M4x12P tight).
16. Detach the eject unit (a) in the direction of the arrow.
Figure 4-183
4-96