Kyocera ECOSYS P5026cdw Service Manual page 40

2RB/2RC/2RD/2RF/3R6
6 Configure the settings.
1 [Disuse WPS] > [Next] > [Next]
2 [Use LAN cable] > [Next] > [Next]
3 [Easy setup] > [Next]
The machine is detected.
Only one machine can be searched using Wi-Fi Setup Tool. It may take times to search
the machine.
If the machine is not detected, select [Advanced setup] > [Next]. Select [Express] or
[Custom] as device discovery method, specify the IP address or host name to search the
machine.
4 Select the machine > [Next]
5 Select [Use the device setting] via [Certification mode], and enter [the login user name] and
[the login password] (Admin together) > [Next]
6 Execute the communication settings > Click [Next]
7 Change the settings of access point as necessary > [Next]
The network is configured.
Connect to the wireless by Using Wi-Fi Direct
1 Display the screen.
1 [OK] key > [A] [▼] key > [Wi-Fi Direct Setting] > [►] key
2 Enter the administrator ID, select [OK] key.
Enter that ID is the number of one to sixteen digits.
Select [A] or [▼] key, and enter the numerical values.
If you select [◄] or [►] key, the entering position moves left and right.
The default of administrator ID in the factory shipment is set 2600 or 2100.
3 Enter an administrator password, and select [OK] key.
Enter that a password is the number of 0(No setting) to sixteen digits.
Select [A] or [▼] key, and enter the numerical values.
If you select [◄] or [►] key, the entering position moves left and right.
The default of administrator password in the factory shipment is set 2600 or 2100.
4 [A] [▼] key > [Wi-Fi Direct] > [OK] key
2 Set
[A] [▼] key > [On] > [OK] key
3 Restart the network.
[OK] key > [A] [▼] key > [Wi-Fi Setting] > [►] key > [A] [▼] key >
[The restart of the network] > [OK] key > [OK] key
2-17