2RB/2RC/2RD/2RF/3R6
35. Detach six screws (b)(M3x6).
36. After pulling in the under direction, release three
hooks (c), and remove the right inner cover (a).
Figure 4-132
37. Disconnect the connector (b) of the solenoid.
38. Disconnect three screws (c)(M3*8), remove the
eject drive unit (a).
39. Check the eject drive unit (a) and clean or replace it.
40. Reattach the parts in the original position.
Figure 4-133
4-69