Bottom Bracket Installation Instructions - Factor OSTRO Assembly Manual

5-1

Bottom Bracket Installation Instructions

Clean the inside of the frame bottom
bracket & the bottom bracket cups with
an isopropyl alcohol.
5-4
Bottom Bracket Instructions for SRAM DUB and Shimano cranksets
For SRAM DUB cranksets, install the included 29mm reducers and
spacers in the following sequence.
Drive Side
1mm+1mm+3mm+29mm reducer
5-2
Apply a layer of good quality assembly
paste to the threads of both bottom
bracket cups. We recommend assembly
paste from Morgan Blue (Auqaproof
Paste) or r.s.p. (Creak Freak Assembling
Paste).
Non Drive Side
29mm reducer+3mm
Assembly Manual
5-3
Thread the cups into the frame and
torque the cups down to 30nm for
the drive side and 40nm for the non
drive side. We recommend using
Park Tool BBT-47.
For Shimano Hollowtech II cranksets, install the included 24mm
Wheels MFG reducers and spacer in the following sequence.
Drive Side
24mm reducer
24mm reducer+1mm+1mm+0.5mm
10
Non Drive Side