Necessary Tools; Instructions; Seatpost - Factor OSTRO Assembly Manual

Necessary tools

BBT-47 Bottom Bracket Tool from Park Tool
Sand paper (120-180 grit)
Park Tool IR-1
Hydraulic bleeding kit
Marker

Instructions

Similar to a Formula 1 car, your Factor OSTRO requires a bit of patience and mechanical skill to achieve a truly impressive
result. We recommend that you have your bicycle assembled and maintained by an authorized Factor dealer. Make sure to let
your mechanic know how much you appreciate their help building the bike of your dreams!
1-1

Seatpost

Route Di2 wire through seat tube and out through bottom
bracket hole, attach Junction B to the end of the Di2 wire at
the bottom bracket
Grease only
Isopropyl alcohol
Assembly paste ( Morgan Blue Auqaproof Paste or r.s.p. Creak Freak Assembling Paste )
Loctite 243
M6x1.0 tap
1-2
Factor frame sets are shipped with 7X9 mm outer rail
clamps for carbon rail saddles. 7x7 mm outer rail
clamps for traditional saddle rails are available through
your Factor dealer.
Assembly Manual
1-3
Adjust the set back and saddle angle to the desired
position. Tighten the M6 saddle clamp bolt to 12 Nm.
round 7x7 mm rails
oval 7x9 mm rails
01