Names And Functions Of Parts - Hioki SM7860-01 Instruction Manual

8

1.2 Names and Functions of Parts

1.2 Names and Functions of Parts
Front Panel
Rear Panel
Voltage output terminal
Connect the included voltage
output connector.
(p.13)
EXT I/O connector
The external I/O connector
can be used to control the
device.
(p.33)
LCD screen
The screen uses a 2-page
layout to display setting val-
ues and setting status infor-
mation.
"1.3 Screen Layout" (p.10)
Vent
Keep clear of ob-
structions.
RS-232C connector
Connect to a computer when
using the RS-232C interface.
(p.19)
Scroll keys (PAGE UP▲/ PAGE
Used to scroll through the display pages.
"1.3 Screen Layout" (p.10)
The scroll keys are also used to set the GP-IB address.
(p.21)
Inter-lock indicator
Lights up when the interlock is
on.
Voltage output indicator
Lights up when a voltage is be-
ing output.
Power indicator
Lights up when the device is on.
POWER switch
Turns the device on and off.
: Power On
: Power Off
(p.15)
Fuse holder
Allows the fuse to be replaced.
(p.47)
Power inlet
Connect the supplied power cord
here. (p.12)
GND terminal
Serves as the ground terminal.
The GND terminal is connected
to the device's enclosure.
GP-IB connector
Connect to a computer when using the
GP-IB interface.
(p.19)
DOWN▼)