Table of Contents
Advertisement
3.6 Message List
Command
Communication conditions
RMT
Remote switching request
Delimiter
Talker delimiter specification
DLM
d1 (delimiter specification: 0 to 2)
0: LF<EOI>
1: CRLF<EOI>
2: <EOI>
Note: This setting reverts to its default value when the instrument
Delimiter query
DLM?
The contents of responses are the same as the settings.
Output voltage setting
Circuit A output voltage setting
VAI
d1: 1.0 to 1000.0 V
Note: Set as an absolute value.
Circuit A output voltage setting query
VAI?
The contents of responses are the same as the settings.
Circuit B output voltage setting
VBI
d1: 1.0 to 1000.0 V
Note: Set as an absolute value.
Circuit B output voltage setting query
VBI?
The contents of responses are the same as the settings.
Output voltage setting range by model
SM7860-01, -21
SM7860-02, -22
SM7860-03, -23
SM7860-04, -24
SM7860-05, -25
SM7860-06, -26
SM7860-07, -27
Alarm setting
Voltage error alarm setting
ARM
d1: 2 to 19%, Circuit A voltage error alarm setting
d2: 2 to 19%, Circuit B voltage error alarm setting
Note: d1 or d2 can be omitted.
Voltage error alarm setting query
ARM?
The contents of responses are the same as the settings.
RS-232C-only commands are indicated by
When using the RS-232C interface to send commands, include a uniform wait
time of 100 ms (excluding the following exceptions).
Description
Default
is powered on. A combination CR+LF is used as the RS-
232C delimiter for both data transmission and reception.
The valid setting range varies with the model.
The valid setting range varies with the model.
Model
Lower limit (V)
250.0
250.0
250.0
Upper limit (V)
1.0
500.0
1000.0
1.0
500.0
1000.0
1.0
500.0
1000.0
1.0
10.0
29
3.6 Message List
.
Formats
[Format] RMT
[Format]
DLM d1
d1: NR1 format
[Format]
DLM?
[Response] d1
[Format]
VAI d1
d1: NR2 format
[Format]
VAI?
[Response] d1
[Format]
VBI d1
d1: NR2 format
[Format]
VBI?
[Response] d1
[Format]
ARM d1,d2
ARM d1
ARM ,d2
[Format]
ARM?
[Response] d1,d2
Advertisement
Table of Contents
