Pre-Operation Inspection - Hioki SM7860-01 Instruction Manual

14

2.4 Pre-Operation Inspection

2.4 Pre-Operation Inspection
Before using the device the first time, verify that it operates normally to ensure that the no
damage occurred during storage or shipping. If you find any damage, contact your dealer or
Hioki representative.
1
Peripheral Device Inspection
•
Is the power cord insulation torn, or is
any metal exposed?
•
Is the connection cord insulation torn, or
is any metal exposed?
2
Device Inspection
Is damage to the device evident?
Does the supply voltage of your power
source match the supply voltage indicated
above the power source inlet on the rear of
the device?
Inspection complete
Please read the "Operating Precautions" (p.3) before use.
Metal Exposed
No Metal Exposed
Yes
No
No
Yes
Do not use a damaged cord because
doing so may result in electric
shock. (Replace the cord with a new
one.)
If damage is evident, request re-
pairs.
Use of a supply voltage outside the
specified range may damage the de-
vice or cause electric shock.