Turning The Power On And Off - Hioki SM7860-01 Instruction Manual

2.5 Turning the Power On and Off

Turning Power On
Turn the POWER switch on ( ).
The power indicator and LCD screen on the front of the device will light up.
Before Starting Measurement
To obtain precise measurements, provide about an hour warm-up after turning power on.
Turning Power Off
Turn the POWER switch off (
• Before turning the device on, make sure the supply voltage matches that
indicated on its power connector. Connection to an improper supply volt-
age may damage the device and present an electrical hazard.
• When turning the device on and off, do not touch the voltage output ter-
minals. Doing so may cause electric shock.
When turning the device on and off, do not connect a load to the voltage output
terminals. Turning the device on or off with a load connected may damage the
load.
Rear Panel
).
2.5 Turning the Power On and Off
POWER switch
15