Load/Send All Configurations - Queclink GL300 User Manual

GL300A Manage Tool User Guide
sending the AT+GTCFG command or sending all commands. This is because GTCFG command can
change password which makes situation complicated.

2.4.Load/Send All Configurations

Step_1: Before sending all configurations, please load the configuration file or set all parameters
in commands. To load configuration file, please select "Read All Configuration" " Load
Configurations From File". Then, select the configuration file you need.
Step_2: You can set the parameters in commands based on the configuration file, and then click
"Send All Configuration" in toolbar.
Note: The command GTRTO will not be sent when clicking "Send All Configuration".
Step_3: Manage Tool will send all commands to the device.
Queclink
Grace Wang Checked
2019.01.11
TRACGL300AMT001 - 20 -