Queclink GL300A User Manual page 15

GL300A User Manual
GNSS chip is powered off.
GNSS sends no data or data format error
occurs.
GPS (Blue)
GNSS chip is searching GNSS information.
GNSS chip has got GNSS information.
The external power supply is connected and
the device is charging.
The external power supply is connected and
the device charging is complete.
The external power supply is not connected
and battery capacity is less than 20%.
Power key is pressed when the external power
PWR (Green)
supply is not connected and battery capacity is
no less than 20% (LED on 5s according to
default setting of a relevant FKS parameter)
Power key is pressed when the external power
supply is not connected and battery capacity is
no less than 20% (the relevant FKS parameter
is set to 0)
TRACGL300AUM001
Table 2: Definition of Device Status and LED
OFF
Slow flashing
Fast flashing
ON
LED1-LED5 lighting up in
turn
LED1-LED5 ON
LED1 flashing
LED ON for a period of
time based on the
percentage of battery
capacity
LED always ON based on
the percentage of battery
capacity
- 15 -