Operation; A) General Operation - Renkforce 1233874 Operating Instructions Manual

11. Operation

a) General Operation

The effect light can be controlled with the integrated controller or with an external DMX controller. Additi-
onally, it can be used as a master device with integrated controller to control other connected effect lights
synchronously in master-slave operation, or as slave device via the controller of another effect light.
The settings are made in the menu via the display (5) and the function buttons ESC (7), UP (8), DOWN (9)
and ENTER (10).
• Push the button ESC (7) to get to the menu and select the desired menu item.
• Select the desired option with the buttons UP (8) or DOWN (9) and confirm your selection with the button
ENTER (10).
After a short time without a button being pushed, the display (5) will be switched off. It can be
activated again at any time by pushing any button.
Menu Overview
A00 A00
A 0 A 02
A 0
S f S
S
P f
f
f
f f
S
DMX mode
Automatic mode fast
Automatic mode slow
f Sound-to-light mode off
Sound-to-light mode on
Rotating direction normal
P f
P Rotating direction inverted
f
Swivel direction normal
Swivel direction inverted
f
Display alignment normal
Display alignment inverted
f f
Factory settings on
f
Factory settings off
S
Reset
29