2.3 Symbols used
Danger - high voltage!
Hand:
indicates general information and
recommendations.
Bullet point:
•
indicates the tasks to be
performed.
Arrow:
indicates the response(s) to
®
tasks.
Enumeration sign
3
Defi nition of terms
Control medium
The gas that is controlled by the pilot
solenoid valve.
4
Intended area of use
The GEMÜ 332 - 336 pilot solenoid valves
are designed as single control valves, valves
for direct mounting or as valve manifolds.
They control a streaming gas by opening or
closing electrically.
The pilot solenoid valves may only be
used providing the product technical
criteria are complied with (see
chapter 6 "Technical data").
Do not paint the screws and the plastic
parts on the pilot solenoid valve!
Use the pilot solenoid valves only for
the intended purpose!
Otherwise the manufacturer liability and
®
guarantee will be void.
Use the pilot solenoid valves only
G
in accordance with the operating
conditions specifi ed in the contract
documentation and in the installation,
operating and maintenance
instructions.
The pilot solenoid valves may only
G
be used in potentially explosive
zones confi rmed in the declaration of
conformity (ATEX).
5
Condition as supplied
to customer
The pilot solenoid valves are supplied as
separately packed components.
The female threads are sealed with caps.
Scope of delivery 332
Pilot solenoid valve
O-ring
Sealing plugs
Two fastening / mounting brackets
Scope of delivery 334
Pilot solenoid valve
Hollow bolt with sleeve
Three O-rings
Scope of delivery 336
Pilot solenoid valve
Option: Accessories
18/30
WARNING
332, 334, 336