6.3
Installing the diaphragm pump
Fig. 4: Installation
1.
Attach the bracket ( Fig. 4/1) to a wall or supporting construction with the appropriate
screws so that the fluid intake connection ( Fig. 4/2) faces vertically downwards after
assembly.
Fig. 5: Installation
2.
Lightly grease three screws ( Fig. 5/3).
3.
Attach the diaphragm pump ( Fig. 5/4) to the bracket ( Fig. 5/2) with the screws ( Fig. 5/3).
4.
Screw the earth connection to the earth connection screw ( Fig. 5/1).
GB–20
Operating instructions
T-Dok-236-GB-Rev.1
mail@krautzberger.com, www.krautzberger.com