Installing The Diaphragm Pump - Krautzberger MP-400 Operating Instructions Manual

Diaphragm pump MP-400
6.3

Installing the diaphragm pump

Fig. 3: Installation
1. Attach the bracket ( Fig. 3/1) to a wall or supporting construction with the appropriate
screws so that the fluid intake connection ( Fig. 3/2) faces vertically downwards after
assembly.
Fig. 4: Installation
2. Lightly grease three screws ( Fig. 4/3).
3. Attach the diaphragm pump ( Fig. 4/4) to the bracket ( Fig. 4/2) with the screws ( Fig. 4/3).
4. Screw the earth connection to the earth connection screw ( Fig. 4/1).
Item number: 200-0102
ENGLISH
GB–19